Leon Rollbearing China
5 1

Deep Groove Ball Bearings

Contact Now* Send an Inquiry to this supplier.
or
Start Order * Name your price

Browse by Category

Contact us

Leon Rollbearing China
[China]

Address
3903-16,Jiangwanhuayuan.chong an area. Wuxi 江苏
Phone
86-510-15301432333
Contact name
Ivan Chu

Quick Information

  • Place of Origin: China

Description

★ Product Features

Deep groove ball bearings consist of four basic components: the inner race (inner race), the outer race (outer race), the steel ball and the cage. Under normal operating conditions, the inner raceway, the outer raceway and the steel ball are subjected to loads, while the cage acts as a steel ball to separate and maintain stability. The single row radial deep groove ball bearing has simple structure, no separation between inner and outer rings, and convenient use, such as precision instrument, low noise motor, automobile, motorcycle, woodworking machinery, transmission shaft of textile machinery, mining machinery, electromechanical equipment, plastic machinery, office Instruments, medical devices, fitness, defense, aerospace, aerospace and sports equipment and general machinery are the most widely used types of bearings in the machinery industry. It is mainly used to withstand radial loads and can also withstand a certain amount of axial load. When the bearing radial clearance is increased, it has the property of a radial thrust bearing and can withstand large axial loads. Such bearings limit axial movement in both directions. The inner and outer rings are allowed to tilt relative to each other 8'~16' depending on the size of the play.

★ Product Categories

The deep groove ball bearings currently produced can be roughly divided into the following types of structures:

Single row deep groove ball bearing

Single row deep groove ball bearing with dust cover

Single row deep groove ball bearing with dust cover and sealing ring

Single row deep groove ball bearing with snap groove and stop ring on outer ring

Single row deep groove ball bearing

Generally, such a bearing can be used in components that are installed, sealed, and matched without special requirements.

Single row deep groove ball bearing with dust cover

These bearings can be used for lubrication difficulties and for checking lubrication difficulties and special conditions. There is a gap between the dust cover and the inner ring. Bearings with dust caps on both sides are filled with the appropriate lubricant at the time of manufacture, so no cleaning or lubrication is required during installation. In operation, no additional lubricant is required during the allowed lubrication period.

Single row deep groove ball bearing with sealing ring

Sealing rings generally use steel skeleton rubber seals. It is a contact seal compared to a deep groove ball bearing with a dust cover. Dust and water resistance is better, but the frictional resistance is larger and the speed is limited.

Single row deep groove ball bearing with snap groove and stop ring on outer ring

The snap ring can be used for axial positioning, which simplifies installation in the housing.

★ Size range

The basic dimensions of deep groove ball bearings are listed in the dimension data sheet.

Inner diameter size range: 10mm ~ 1320mm

Outer diameter size range: 30mm ~ 1600mm

Width range: 9mm ~ 300 mm

★ Tolerance

Standard deep groove ball bearings have a common grade, all in accordance with GB307.1.

★ Radial clearance

Standard deep groove ball bearings have C2, standard (CN), C3, C4 and C5 internal clearances, all in accordance with GB4604. The radial clearance values are detailed in the introductory table and their values apply to unmounted and unloaded bearings. Bearings with internal clearance greater or less than the standard value can also be produced according to user requirements.

★ Cage

Deep groove ball bearings generally use steel stamped cages or brass solid cages. When the outer diameter is less than 400 mm, the steel stamping cage is not added with a post code. When the outer diameter is larger than 400 mm, the brass solid cage is not used with a post code.

★ Allow angle error

Deep groove ball bearings allow for relative angular tilt of the inner and outer rings. According to the radial clearance, the list is as follows:

Radial clearance

Allowable angular error

Basic group

8'

Group 3

12'

Group 4

16'

★ Equivalent dynamic load

P=XFr+YFa[kN]

Fr: radial load kN

Fa: axial load kN

★ Equivalent static load

P0=Fr[kN] Fa/Fr≤0.8

P0=0.6Fr+0.5 Fa[kN] Fa/Fr>0.8


Product Image

  • Deep Groove Ball Bearings image

Send an Inquiry to this supplier

Send an Inquiry to this supplier
* From
  To Ivan Chu
Leon Rollbearing China
* Buying Product
- Please enter your specific buying item.
e.g. 42 inch LCD TV, leather executive chair
Category : Deep Groove Ball Bearing
* Message

Use English only Max. 2000 characters. (Min. 20)

Send
EC21.com does not guarantee the validity of product information or the credentials of sellers.